The production process is visible for knitted garden hoses
During the use of the vacumm cleaner pipe, a must-have problem is to fix it. Because the entire body of the suction pipe is spiral, there are many different problems from the conventional hose during the fixing process. We will do the following analysis on the problem of fixing the vacuum pipe.
One: The fixed connection of the vacumm cleaner pipe
The connection of the vacumm cleaner pipe is generally connected with the hard pipe. The inner diameter of the suction pipe is sleeved on the outer diameter of the hard pipe, and then the hose clamp is used to lock it. When the soft and hard pipes are connected, there may be gaps, which will cause the leakage of liquid and gas. At this time, the hose clamp will play a very important role. Generally use stainless steel German, American and other hose clamps. The hose clamp effectively solves the problem of gaps when connecting soft and hard pipes, and it is also very simple to use. Simply put it on and tighten the screws.
Two: How to connect the hose to the hose
Due to the limitation of the vacumm cleaner pipe in the production process, the normal production standards for domestic and foreign vacuum pipe are 10 meters, 15 meters and 20 meters, and the longest does not exceed 20 meters, especially some large diameter hoses are generally 10 meters When it is produced, the length of the cooling water tank is limited during production. The maximum length cannot exceed 20 meters. In addition, customers occasionally use more than 20 meters in length. At this time, the hose must be connected to the hose. In this case, a relatively short rigid tube is usually used to cover the suction tube and then locked with a hose clamp. When encountering some particularly demanding conditions of use, ordinary hard pipes may not meet the requirements and must be connected using stainless steel.
Related Posts
