Brief introduction of clamp rubber joint
The pvc conductive static suction hose is mixed with the static conductive agent in the polyurethane raw material, and the produced hose wall has the characteristic of conducting static electricity. The static-dissipating and wear-resistant conveying hose has the characteristics of a similar stainless steel hose, and the wall of the tube can conduct static electricity, thereby neutralizing the electrostatic ions generated by the friction during the conveying of the material in the hose, thereby preventing the material caused by static electricity. Blockage and static accidents.
Another anti-static suction hose is a layer of copper wire sandwiched between the tube walls of the hose. Since the copper wire is a good conductor, the static electricity can be quickly and effectively conducted, thereby preventing static electricity. When conveying some wear-resistant materials, due to the mutual friction between the material molecules, positive and negative charge separation occurs. This is often called electrostatic ions. Since the pipe wall is insulated, the generated electrostatic ions are Cannot be removed from the inside of the pipe wall in time. A large amount of electrostatic ions accumulate for a long time, and positive and negative charges are generated at both ends of the hose, which causes the transportation of the material to be blocked. To eliminate the positive and negative charges generated, it is necessary to conduct the electrostatic ions at both ends of the hose, guide them to the ground or connect them through wires, and neutralize the positive and negative charges. At this time, the copper wire on the inner wall of the hose can quickly neutralize the ions at both ends by connecting stainless steel at both ends. Ensure normal transport and circulation within the pipe wall. The copper wire anti-static wear-resistant conveying hose is an electrostatic conveying hose commonly used in the industry.